Bambu Lab 4-in-1 PTFE Adapter

Name: Bambu Lab 4-in-1 PTFE Adapter
Brand: Bambu Lab
Availability: InStock

Bambu Lab

The Bambu 4-in-1 PTFE Adapter is an adapter used to connect the PTFE tube. Compared to the original PTFE tube connector, the 4-in-1 adapter can connect 4 feeder modules to the printer at the same time. (up to 7 different filaments: 1 AMS and other 3 filaments)

It can help users to connect the printer to AMS along with other filaments which are not compatible with AMS such as TPU …

It can help users to connect the printer to AMS along with other filaments which are not compatible with AMS such as TPU 95A, Bambu PET-CF and other brands' carbon-fiber/glass-fiber contained filaments.

Installation

Learn more about the replacement of Bambu 4-in-1 PTFE Adapter on Bambu Lab Wiki .

Compatibility

X1 Series and P1 Series

In the Box

Bambu 4-in-1 PTFE Adapter *1

Instructions for use

The Bambu 4-in-1 PTFE Adapter is designed with a clear direction of use, as shown in the figure below.
1. When using AMS:
- Connect the PTFE tube from the tool head to the OUT end of the Bambu 4-in-1 PTFE Adapter.
- Connect the PTFE tube from the buffer output to one of its IN ends. - Directly insert a maximum of three filament wires into each hole of the Bambu 4-in-1 PTFE Adapter IN end.

2. When the AMS is not being used:
- Connect the PTFE tube from the tool head to the OUT end of the Bambu 4-in-1 PTFE Adapter.
- Directly insert a maximum of four filament wires into each hole of the Bambu 4-in-1 PTFE Adapter IN end.
It is important to note that reversing connections may cause filament blockage. Therefore, it is essential to ensure that the installation direction is correct.

Skoða nánari lýsingu

Fela nánari lýsingu

Verslaðu hér

3D Verk

1.490 kr.

3D Verk ehf 577 3020 Skútuvogi 6, 104 Reykjavík

Upplýsingar eru birtar með fyrirvara um breytingar og villur. Upplýsingar á síðu söluaðila gilda.