Bambu PLA Glow - 1kg.
Endurlýsandi efni frá Bambu Lab til í mörgum litum. UV ljós lýsa best upp sjálflýsandi efni.
Endurlýsandi efni eru mjög stökkt og hentar almennt ekki í AMS vegna brothættu við skiptingar á efnum
Hertan stút þarf til að prenta sjálflýsandi efni þar sem þau eru með tærandi kornum í sér og 0.2mm stútur hentar ekki útaf stífluhættu
Product Features
- Unique Glo…
Endurlýsandi efni frá Bambu Lab til í mörgum litum. UV ljós lýsa best upp sjálflýsandi efni.
Endurlýsandi efni eru mjög stökkt og hentar almennt ekki í AMS vegna brothættu við skiptingar á efnum
Hertan stút þarf til að prenta sjálflýsandi efni þar sem þau eru með tærandi kornum í sér og 0.2mm stútur hentar ekki útaf stífluhættu
Product Features
- Unique Glow in Low Light Conditions
- Includes Basic Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- AMS Compatible, but can lead to faster wear on internal components
- AMS lite NOT Compatible
- 0.2 mm Nozzle NOT Compatible
- Note: A hardened nozzle is required when printing regularly
PLA Glow stands out due to its incorporation of a unique additive: luminous powder. This variant retains the familiar qualities of traditional PLA, including easy printing, high quality, and exceptional overall mechanical properties. What sets PLA Glow apart is its distinctive feature - it glows in the dark. This makes it the optimal selection for crafting luminous nameplates, logos, jewelry, and various models that require a captivating glow effect.
Unique Glow in Low Light Conditions
Bambu PLA Glow incorporates a distinct additive: luminous powder, which imparts a special property to printed objects, causing them to emit a captivating glow in the dark.
Accessory Compatibility
* A hardened nozzle is required when printing regularly.
* It is not recommended to print Bambu PLA Glow and other glow-in-the-dark PLA filaments with AMS Lite. These filaments, being hard and rough, may cause feeding failures due to substantial feeding resistance.
PLA Glow Hex Code Table
* The hex code indicates the daytime color of PLA Glow.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Downloads
Filament TDS
Filament MSDS
Filament RoHS
Printing Tips
• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
• Printing with a 0.2 mm nozzle is not recommended; instead, it is advised to use a 0.4 mm nozzle for optimal results.
• The model's luminous intensity diminishes over time, but exposure to ultraviolet or sunlight for a brief period (approximately 2 hours) can rejuvenate its glow. However, prolonged or frequent irradiation may expedite PLA aging.
• Not suitable for AMS lite: Utilizing AMS lite may result in high feed resistance and an increased risk of feed failure. Consider alternative methods such as pre-use drying for better outcomes.
Almennar upplýsingar
| Recommended | Not Recommended | |
| Build Plate | Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate | / |
| Hotend | Hotend with Hardened Steel Nozzle 0.4 mm / 0.6 mm / 0.8 mmHotend with Stainless Steel Nozzle 0.4 mm* | Hotend with Stainless Steel Nozzle 0.2 mm |
| Glue | Bambu Liquid GlueGlue Stick | / |
| AMS & AMS lite | AMS | AMS lite* |
| Color | Hex Code | Display |
| Glow Green | #A1FFAC | |
| Glow Yellow | #F8FF80 | |
| Glow Pink | #F17B8F | |
| Glow Blue | #7AC0E9 | |
| Glow Orange | #FF9D5B | |
| Recommended Printing Settings | ||
| Drying Settings (Blast Drying Oven) | 55 °C，8 h | |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) | |
| Nozzle Temperature | 190 - 230 °C | |
| Bed Temperature (with Glue) | 35 - 45 °C | |
| Printing Speed | < 250 mm/s | |
| Physical Properties | ||
| Density | 1.26 g/cm³ | |
| Vicat Softening Temperature | 56 °C | |
| Heat Deflection Temperature | 55 °C | |
| Melting Temperature | 155 °C | |
| Melt Index | 23.3± 2.4 g/10 min | |
| Mechanical Properties | ||
| Tensile Strength | 32 ± 3 MPa | |
| Breaking Elongation Rate | 8.6 ± 1.2 % | |
| Bending Modulus | 2640 ± 130 MPa | |
| Bending Strength | 76 ± 4 MPa | |
| Impact Strength | 27.3 ± 2.2 kJ/m² |
Verslaðu hér
-
3D Verk
Upplýsingar eru birtar með fyrirvara um breytingar og villur. Upplýsingar á síðu söluaðila gilda.