Bambu PLA Metal - 1kg.
PLA efni frá Bambu Lab sem hermir útlitslega eftir málmáferð, bæði í glans og áferð. Kemur á 1kg. endurnýtanlegri Bambu Lab spólu og með RFID merki til að lesa spóluna sjálfkrafa inn í AMS litastöðina.
Product Features
- Metal Surface Texture & Metallic Shine
- No Metal particle infill
- Relatively high impact strength
- Comes with Basic Reusable Spool
- Diameter…
PLA efni frá Bambu Lab sem hermir útlitslega eftir málmáferð, bæði í glans og áferð. Kemur á 1kg. endurnýtanlegri Bambu Lab spólu og með RFID merki til að lesa spóluna sjálfkrafa inn í AMS litastöðina.
Product Features
- Metal Surface Texture & Metallic Shine
- No Metal particle infill
- Relatively high impact strength
- Comes with Basic Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
- AMS Compatible
Bambu PLA Metal
Bambu PLA Metal is a metallic textured filament designed to enhance the aesthetic of your prints. It is designed to mimic the surface texture of metal, but it does not contain actual metal fillers.
With its advanced metallic shine, this filament offers a professional and high-end finish and a touch of sophistication to your prints while retaining almost the same comprehensive performance of regular PLA.
Accessory Compatibility
PLA Metal Hex Code Table
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Almennar upplýsingar
| Recommended | Not Recommended | |
| Build Plate | Cool Plate, High Temperature Plate or Textured PEI Plate | Engineering Plate |
| Hotend | All Size / Material | / |
| Glue | Bambu Liquid GlueGlue Stick | / |
| Color | Hex Code | Display |
| Iridium Gold Metallic | #B39B84 | |
| Copper Brown Metallic | #AA6443 | |
| Oxide Green Metallic | #1D7C6A | |
| Cobalt Blue Metallic | #39699E | |
| Iron Gray Metallic | #43403D | |
| Recommended Printing Settings | ||
| Drying Settings (Blast Drying Oven) | 55 °C, 8 h | |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) | |
| Nozzle Temperature | 190 - 230 °C | |
| Bed Temperature (with Glue) | 35 - 45 °C | |
| Printing Speed | < 300 mm/s | |
| Physical Properties | ||
| Density | 1.25 g/cm³ | |
| Vicat Softening Temperature | 62 °C | |
| Heat Deflection Temperature | 62 °C | |
| Melting Temperature | 160 °C | |
| Melt Index | 38.6 ± 3.7 g/10 min | |
| Mechanical Properties | ||
| Tensile Strength | 34 ± 4 MPa | |
| Breaking Elongation Rate | 14.7 ± 1.5 % | |
| Bending Modulus | 2290 ± 210 MPa | |
| Bending Strength | 66 ± 3 MPa | |
| Impact Strength | 58.9 ± 3.4 kJ/m² |
Verslaðu hér
-
3D Verk
Upplýsingar eru birtar með fyrirvara um breytingar og villur. Upplýsingar á síðu söluaðila gilda.