SPÍSSAHREINSIR BENSÍN 4T 100ML

DESCRIPTION Eurol Motorcycle Injection Clean is formulated to clean contaminated petrol injection systems, to restore injector efficiency and to improve fuel atomization. Removes carbon deposits and deposits from fuel lines, fuel distributors, injection and inlet valves. Eurol Motorcycle Injection Clean is recommended for motorbikes with rough idling, stumbling due to dirty injectors (clogged injector nozzles) that are restricted due to fuel deposits or if the engine is having a hard time with tough starts or it may be running roughly. Eurol Motorcycle Injection Clean can be used in vehicles equipped with a catalytic converter. The 100ml bottle of Eurol Motorcycle Injection Clean is recommended for use in 15L to 25L of fuel and let the cleaner run through the fuel system. Add the Eurol Motorcycle Injection Clean to the fuel tank before refueling. For best results use about once every 2.500 km because deposits form with every tank of fuel. Also change the air and fuel filters for regular maintenance, especially with in-city driving conditions. After using this product, you should notice better performance from the engine when accelerating and a quieter engine when running stationary. An injection cleaner will not repair actual mechanical failures (ignition, timing, etc). Users should consult the Material Safety Data Sheet of Eurol Motorcycle Injection Clean for information about storage and shelf life. Please ask Eurol Research & Development if any further information is required. PERFORMANCE SPECIFIC VALUES Color Colourless Density at 20°C 0.8071 kg/l Viscosity, kinematic at 40°C 2.8 cSt Flash point 62 °C