Vörumynd

Bambu Lab H2/P2/X2 stútar

Bambu Lab

Stútar fyrir Bambu Lab H2,P2 og X2 prentarana, í boði eru hert stál og ryðfrítt. Það eru til háflæðis (high-flow) stútar þá má finna hér .

Hert stál:

  • 0.4mm
  • 0.6mm
  • 0.8mm

Ryðfrítt stál:

  • 0.2mm

Almennt eru ekki til stútar úr hertu stáli fyrir 0.2mm þar sem CF/GF og glow-in-the-dark efni eiga ekki að vera prentuð með svo litlum stút útaf stífluhættu.


…

Stútar fyrir Bambu Lab H2,P2 og X2 prentarana, í boði eru hert stál og ryðfrítt. Það eru til háflæðis (high-flow) stútar þá má finna hér .

Hert stál:

  • 0.4mm
  • 0.6mm
  • 0.8mm

Ryðfrítt stál:

  • 0.2mm

Almennt eru ekki til stútar úr hertu stáli fyrir 0.2mm þar sem CF/GF og glow-in-the-dark efni eiga ekki að vera prentuð með svo litlum stút útaf stífluhættu.


Quick Swap Nozzle Design

The special design of H2D hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. Simply unlock the latch for quick and easy hotend removal and installation.

*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.

0.2mm Nozzle - Optimal Print Fineness

Smaller diameter extrudes thin filaments
High resolution on the horizontal print surface


0.6mm and 0.8mm Nozzle - Faster Print Speed

Larger diameter extrudes more filaments per second, resulting in faster print speed

Comparison of Different Nozzle Sizes


*The final display of 'Model Strength' & 'Model Fineness' depend on the results of the material testing.


Filament Compatibility


[Note]
  1. Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle .
  2. For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
  3. Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle , while also achieving higher print quality.

Almennar upplýsingar

0.2 mm Nozzle 0.4 mm Nozzle 0.6 mm Nozzle 0.8 mm Nozzle
Usage scenario Perfect for small and intricate models, with precision that’s worth the wait Ideal for everyday use with the perfect balance of speed and qualty Faster speeds and capable of printing high-performance filaments, with some decrease in resolution Faster speeds and capable of printing high-performance filaments, with some decrease in resolution
Commonly used for Miniature modelsIntricate logosTextMolds ToysMechanical partsDecorative objects Large structural partsFunctional parts for householdIndustrial or engineering partsHigh-strength models Large structural partsFunctional parts for householdIndustrial or engineering partsHigh-strength models
Filament 0.2 mmStainless Steel 0.4 mmHardened Steel 0.6 mmHardened Steel 0.8 mmHardened Steel 0.4 mm High FlowHardened Steel
PLA Basic √ √ √ √ √
PLA Matte √ √ √ √ √
PLA Basic Gradient √ √ √ √ √
PLA Silk+ √ √ Not recommended Not recommended √
PLA Silk Dual Color √ √ Not recommended Not recommended √
PLA Silk √ √ Not recommended Not recommended √
PLA Metal √ √ √ √ √
PLA Marble Not recommended √ √ √ √
PLA Sparkle Not recommended √ √ √ √
PLA Wood Not recommended √ √ √ √
PLA Galaxy Not recommended √ √ √ √
PLA Glow X √ √ √ √
PLA-CF X √ √ √ √
PLA Aero X √ Not recommended Not recommended √
PETG HF √ √ √ √ √
PETG Translucent Not recommended √ √ √ √
PETG-CF X √ √ √ √
ABS √ √ √ √ √
ABS-GF X √ √ √ √
ASA √ √ √ √ √
ASA Aero X √ Not recommended Not recommended √
ASA-CF X √ √ √ √
PC √ √ √ √ √
PC FR √ √ √ √ √
TPU for AMS X √ √ √ √
TPU 95A HF X √ √ √ √
TPU 85A X X √ √ X
TPU 90A X √ √ √ X
PAHT-CF X √ √ √ √
PET-CF X √ √ √ √(Only for Left Hotend)
PA6-CF X √ √ √ √
PPA-CF X √ √ √ √(Only for Left Hotend)
PPS-CF X √ √ √ √(Only for Left Hotend)
Support for ABS X √ √ √ √
Support for PLA/PETG √ √ √ √ √
Support for PA/PET X √ √ √ √
Support for PLA (New Version) √ √ √ √ √
PVA X √ √ √ √
PA6-GF X √ √ √ √
Skoða nánari lýsingu
Fela nánari lýsingu
0.2mm ryðfrítt stál 0.4mm hert stál 0.6mm hert stál 0.8mm hert stál
  • 3D Verk
    3.490 kr.
    3D Verk ehf | 577 3020 577 3020 Skútuvogi 6, 104 Reykjavík

Upplýsingar eru birtar með fyrirvara um breytingar og villur. Upplýsingar á síðu söluaðila gilda.